Jianxin Machinery Intelligent Asphalt Mixing Plant Equipment Configuration

With the rapid development of the social economy, people's living conditions have undergone tremendous changes. The road environment that is closely related to people's lives bears the brunt. "Before, slow," said that "the previous car and horse mail were slow", as opposed to the previous The road surface is generally covered with bricks and gravel. If the speed of the horses is fast, the road life is not only short, but the passers-by will enjoy the dusty feast.
Nowadays, although most urban concrete pavements account for a large proportion, asphalt roads have begun to stand out because of their low noise, dust-free and comfortable driving characteristics, which are favored by people. Asphalt mixing equipment is one of the indispensable equipments for asphalt pavement construction, and its mechanical engineering is complicated. So how to choose a good asphalt equipment is very important. As a high-tech enterprise that constantly innovates and strives for the best professional production of asphalt mixing equipment, we have the following advantages that you cannot resist.

1、Main burner lifetime free warranty
As the core component of the asphalt mixing equipment, the advantages and disadvantages of the main burner determine the fuel cost and quality of the finished asphalt mixing equipment. The function of the combustion device is to provide a heat source for the cold aggregate drying and heating. The condition of providing the heat source is not only the high quality fuel but also the advanced nature of the burner itself, whether the fuel can be fully atomized, and whether the wind oil ratio can be adjusted by frequency conversion. These problems are the advanced performance characteristics of a high-quality burner, whether it can be quickly ignited after fire, whether it can be operated intelligently. Jianxin's main burner uses self-developed "low-pressure bubble atomization" technology to support oil and gas dual-use, and has won many national patent certificates, so Jianxin has enough confidence to ensure that we build a new brand of burner lifetime warranty.
2、Container type atmospheric backflush bag dust collector
The dust removal system is a container-type atmospheric back-flush bag dust collector. The front part adopts gravity type dust removal, which can adjust the fine particles at any time, reduce and increase the powder content of the No. 1 silo, and the rear part is a step-type back-flush bag dust removal. The principle is to use a reducer to control the wheel mechanism and the rotary port. The induced draft fan generates a negative pressure and sucks into the atmospheric rotating port to blow the air for multi-angle bag cleaning. The dust removed by the bag filter is deposited in the lower box of the dust collector and can pass through the lower box. The spiral discharge bag in the body is sent to the recovery powder tank through the recycled powder screw conveyor and the recycled powder elevator.
3、Efficient mixing capacity
The mixing tank adopts the high-speed synchronous driving double-shaft forced mixing mode, and the mixing tank can be stirred without the asphalt spraying device, the mixing period is short, and the discharging port adopts the flip door design to avoid uneven mixing and easy jamming. The mixing tank has a dust-free discharge device, which is green and environmentally friendly. The device has been patented.
If you can see this, then you are still looking for asphalt mixing equipment. I believe you will have the best answer in your heart.

<< Previous：Dry-mixed mortar cost higher than wet-mixed mortar?
<<  Next：Which model should be selected for investment in building 1 cubic concrete mixing plant?